File:Models of Proba-3 designs (26205611893).jpg
File originale (3 187 × 2 125 pixel, dimensione del file: 1,08 MB, tipo MIME: image/jpeg)
Questo file e la sua pagina di descrizione (discussione · modifica) si trovano su Wikimedia Commons (?) |
Dettagli
DescrizioneModels of Proba-3 designs (26205611893).jpg |
The design evolution of ESA’s Proba-3 double satellite is shown by this trio of 3D-printed models, each pair – from left to right – produced after successive development milestones. “These paired models, <a href="http://www.esa.int/Our_Activities/Space_Engineering_Technology/Ten_ways_3D_printing_could_change_space" rel="nofollow">3D printed in plastic</a>, were not made for show,” explains Agnes Mestreau-Garreau, ESA’s project manager. “Instead, they’re used almost daily. Because <a href="http://www.esa.int/spaceinvideos/Videos/2015/03/Proba-3_Dancing_with_the_stars" rel="nofollow">Proba-3 will be the first precision formation-flying mission</a> – with the two satellites flying in tandem– these models help the team to visualise their orientation, as well as to explain the mission easily to people. So the models have ended up somewhat battered as a result. “The first model set was printed after our System Requirements Review, followed by our Preliminary Design Review and now Mission Consolidation Milestone – with consequent changes in mission mass, volume and design details.“ The latest member of ESA’s experimental Proba minisatellite family, Proba-3’s paired satellites will manoeuvre relative to each other with millimetre and fraction-of-a-degree precision, intended to serve as the virtual equivalent of a giant structure in space and so open up a whole new way of running space missions. As has become traditional with Proba missions, the success of Proba-3’s technology will be proven through acquiring high-quality scientific data. In this case, the smaller ‘occulter’ satellite will blot out the Sun’s fiery disc as viewed by the larger ‘coronagraph’ satellite, revealing mysterious regions of our parent star’s ghostly ‘corona’, or outer atmosphere. When in Sun-observing mode, the two satellites will maintain formation exactly 150 m apart, lined up with the Sun so the occulter casts a shadow across the face of the coronagraph, blocking out solar glare to come closer to the Sun’s fiery surface than ever before, other than during frustratingly brief terrestrial solar eclipses. The challenge is in keeping the satellites safely controlled and correctly positioned relative to each other. This will be accomplished using various new technologies, including bespoke formation-flying software, GPS information, intersatellite radio links, startrackers, and optical visual sensors and optical metrologies for close-up manoeuvring. Fifteen ESA Member States are participating in the Proba-3 consortium, with SENER in Spain as prime contractor for the satellite platforms and Centre Spatial de Liège in Belgium as prime contractor for the coronagraph. “This grouping includes several of the newer ESA Member States, including the Czech Republic, Poland and Romania,” adds Agnes. “It is a strength of this kind of small but ambitious mission that new entrants to the space sector can find important industrial roles to play on a more flexible basis than in some larger-scale programmes.” <a href="http://www.esa.int/Our_Activities/Space_Engineering_Technology/Proba_Missions/About_Proba-3" rel="nofollow">Proba-3</a>’s next milestone will be the Payload Critical Design Review for its coronagraph, expected in the autumn followed by the System Critical Design Review for the mission. The two satellites will be stacked together for launch in 2019 before separating in orbit. Credit: ESA-G. Porter <a href="https://creativecommons.org/licenses/by-sa/3.0/igo/" rel="nofollow">CC BY-SA 3.0 IGO</a> |
Data | |
Fonte | Models of Proba-3 designs |
Autore | European Space Agency |
Licenza
- Tu sei libero:
- di condividere – di copiare, distribuire e trasmettere quest'opera
- di modificare – di adattare l'opera
- Alle seguenti condizioni:
- attribuzione – Devi fornire i crediti appropriati, un collegamento alla licenza e indicare se sono state apportate modifiche. Puoi farlo in qualsiasi modo ragionevole, ma non in alcun modo che suggerisca che il licenziante approvi te o il tuo uso.
- condividi allo stesso modo – Se remixi, trasformi o sviluppi il materiale, devi distribuire i tuoi contributi in base alla stessa licenza o compatibile all'originale.
Questa immagine è stata originariamente caricata su Flickr da europeanspaceagency all'indirizzo https://flickr.com/photos/37472264@N04/26205611893. È stata controllata in data 11 dicembre 2020 dal robot FlickreviewR 2 ed è stato confermato il suo rilascio sotto i termini della licenza cc-by-sa-2.0. |
11 dicembre 2020
Elementi ritratti in questo file
raffigura
Valore sconosciuto senza un elemento Wikidata
26 apr 2016
1 136 947 byte
2 125 pixel
3 187 pixel
image/jpeg
d868e0234325aca8f9aee413fead40f2106a727d
0,00625 secondo
24 millimetro
Cronologia del file
Fare clic su un gruppo data/ora per vedere il file come si presentava nel momento indicato.
Data/Ora | Miniatura | Dimensioni | Utente | Commento | |
---|---|---|---|---|---|
attuale | 12:07, 11 dic 2020 | 3 187 × 2 125 (1,08 MB) | Eyes Roger | Transferred from Flickr via #flickr2commons |
Pagine che usano questo file
La seguente pagina usa questo file:
Utilizzo globale del file
Anche i seguenti wiki usano questo file:
- Usato nelle seguenti pagine di gl.wikipedia.org:
Metadati
Questo file contiene informazioni aggiuntive, probabilmente aggiunte dalla fotocamera o dallo scanner usati per crearlo o digitalizzarlo. Se il file è stato modificato, alcuni dettagli potrebbero non corrispondere alla realtà.
Produttore fotocamera | NIKON CORPORATION |
---|---|
Modello fotocamera | NIKON D4 |
Autore | Anneke Le Floc'h |
Informazioni sul copyright |
|
Tempo di esposizione | 1/160 s (0,00625) |
Rapporto focale | f/5,6 |
Sensibilità ISO | 800 |
Data e ora di creazione dei dati | 14:47, 26 apr 2016 |
Distanza focale obiettivo | 24 mm |
Larghezza | 3 187 px |
Altezza | 2 125 px |
Bit per campione |
|
Struttura dei pixel | RGB |
Orientamento | Normale |
Numero delle componenti | 3 |
Risoluzione orizzontale | 300 punti per pollice (dpi) |
Risoluzione verticale | 300 punti per pollice (dpi) |
Software | Adobe Photoshop CC 2014 (Macintosh) |
Data e ora di modifica del file | 16:18, 26 apr 2016 |
Programma di esposizione | Manuale |
Versione del formato Exif | 2.3 |
Data e ora di digitalizzazione | 14:47, 26 apr 2016 |
Velocità dell'otturatore APEX | 7,321928 |
Apertura APEX | 4,970854 |
Correzione esposizione | 1 |
Apertura massima | 3 APEX (f/2,83) |
Metodo di misurazione | Pattern |
Sorgente luminosa | Sconosciuta |
Caratteristiche e stato del flash | Il flash non è scattato |
Data e ora di creazione, frazioni di secondo | 60 |
Data e ora di digitalizzazione, frazioni di secondo | 60 |
Spazio dei colori | Non calibrato |
Risoluzione X sul piano focale | 1 368,888885498 |
Risoluzione Y sul piano focale | 1 368,888885498 |
Unità di misura risoluzione sul piano focale | 3 |
Metodo di rilevazione | Sensore area colore a 1 chip |
Origine del file | Fotocamera digitale |
Tipo di inquadratura | Fotografia diretta |
Elaborazione personalizzata | Processo normale |
Modalità di esposizione | Esposizione manuale |
Bilanciamento del bianco | Bilanciamento del bianco automatico |
Rapporto zoom digitale | 1 |
Focale equivalente su 35 mm | 24 mm |
Tipo di acquisizione | Standard |
Controllo inquadratura | Enfasi per basso guadagno |
Contrasto | Normale |
Saturazione | Normale |
Controllo nitidezza | Normale |
Scala distanza soggetto | Sconosciuta |
Numero di serie della fotocamera | 2034429 |
Obiettivo utilizzato | 24.0-70.0 mm f/2.8 |
Data in cui i metadata sono stati modificati l'ultima volta | 18:18, 26 apr 2016 |
ID univoco del documento originale | D435C29204540B8905C7773C8A8AEF7D |
Versione IIM | 4 |